Product Category
Intelligent battery swapping cabinet Intelligent shared charging cabinet Intelligent Exclusive Charging Cabinet Lithium battery for electric two-wheeled vehicle and three-wheeled vehicle Lithium battery of electric sanitation car Secondary Lithium Battery Backup Cabinet Outdoor Power Supply Household ESS Industrial and commercial energy storage station Secondary battery UPS Electric fork-lift truck
Solve the battery of electric vehicle at maintenance end Charging problem, easy to manage
Solve the electric vehicle battery charging problem, also convenient to management. Intelligent exclusive charging cabinet products are designed to solve the operation end, for shared electric bikes or B-end electric vehicles need overall management of charging projects. To solve the problem of efficient, convenient and safe charging, charging to the electric vehicle lithium battery with intelligent charging through the exclusive cabin. This product adopts 20 cabins (can customize the number of the cabin).
1.
High efficiency, it can cover more than 3 vehicle dropping points at the same time.
2.
High Cost-effective, the cabinet body adopts the thin structure with front maintenance, to save the floor space.
3.
The exclusive structure design of the whole cabinet door is opened by swiping card, which improves the work efficiency.
KCD1.1A-12
Number Item Specifications
1 Product name Exclusive charging cabinet
2 Product model KCD1.1A-12
3 Number of positions 12
4 Overall dimensions (width * depth * height) 1390*600*1800mm
5 Warehouse opening size (width * height * depth) 300*290*450mm
6 Output voltage range DC 40V-DC 75V
7 Maximum input current of the whole machine 50A
8 Standby power of the whole machine ≤20W
9 Rated power of complete machine 11500W
10 Rated power of single silo 750W
11 Communication mode 4G all-network communication/Ethernet
12 Protection grade IP53/IP54(With canopy)
13 Heat dissipation mode Fan cooling
14 Material quality Steel plate
15 Appearance process Epoxy resin weathering powder
16 Installation method Power on
KCD1.1-8
Number Item Specifications
1 Product name Exclusive charging cabinet
2 Product model KCD1.1-8
3 Number of positions 8
4 Overall dimensions (width * depth * height) 940*600*1800mm
5 Warehouse opening size (width * height * depth) 300*290*450mm
6 Output voltage range DC 40V-DC 75V
7 Maximum input current of the whole machine 40A
8 Standby power of the whole machine ≤20W
9 Rated power of complete machine 9000W
10 Rated power of single silo 750W
11 Communication mode 4G all-network communication/Ethernet
12 Protection grade IP53/IP54(With canopy)
13 Heat dissipation mode Fan cooling
14 Material quality Steel plate
15 Appearance process Epoxy resin weathering powder
16 Installation method Power on
15仓专享充电柜
Number Item Specifications
1 Number of charging chambers 15
2 Overall size 1100×500×1830
3 Size of charging chamber 230×220×350
4 Removable casters Have
5 Power exchange mode Scan the code to open the door
6 Full charge power consumption 15 kWh/cycle (each battery is calculated as 1 kWh)
7 Opening angle of charging chamber door ≥110°
8 Rainproof shed Have
9 Air volume of single fan ≥150m³/h
10 Automatic fire extinguishing device One set per warehouse
11 Smoke detection Have
12 Input voltage AC380V±20%
13 Frequency 50Hz±5%
14 Power cord system Three-phase five-wire
15 Power line diameter 6Square metre BVR
16 AC input switch ≥63A
17 Rated power of the whole cabinet 11kW
18 Maximum input current 20A/Each other
19 Protection function Leakage and short circuit
20 Cabinet control power supply DC12V
21 Standby power function Not have
22 DC output power 100W
23 DC output current 8.5A
24 Power-off memory function Apolegamy
25 Operating ambient temperature -30℃~+55℃
26 Storage and transportation temperature -40℃~+70℃
27 Working relative humidity ≤95%(40℃士2℃)
28 Grounding stud diameter 8mm
29 Sectional area of grounding conductor ≥2.5mm²
30 Insulation resistance ≥2MΩ(500V)
31 Touch current ≤3.5mA
32 Part temperature rise 65K
33 Rated load noise ≤60dB
34 Background remote upgrade Have
35 Communication bus 485
36 External communication 4G
37 Bluetooth Communicator Apolegamy
38 Temperature sensing range -40℃~105℃
39 Temperature measurement accuracy ≤1℃
40 Water immersion sensor Have
41 Water immersion detection sensitivity 40kΩ±10kΩ
42 Surveillance camera Apolegamy
43 Display 7cun
44 Lightning surge Have
45 Design life 8Year
46 Heating device Have
47 Diameter of inlet hole ≥20mm
20-Cabin Exclusive charging cabinet
Configuration:
Equipped with lock control system.
Equipped with cabinet door monitoring system.
Equipped with smoke alarm, water level monitoring, temperature alarm system.
Equipped with independent automatic extinguishing device, independent air cooling system.
Equipped with over pressure, over current, short circuit, electric leakage, power cut protection functions.
It has the functions of scanning code payment, automatic charging, full stop, autocharge etc.
Optional:
Video monitoring system
Remote charge date statistics
UPS system
Water level monitoring automatic power off
Color advertising screen

Number Item Specification
1 Product Name Intelligent Charging Cabinet
2 Product Mode KCD1.1-20
3 Cabin Quantity 20 Cabin
4 Overall size(Width*Depth*Height) 1506*400*1650mm
5 Cabin Opening Size(Width*Height*Depth) 200*200*355mm
6 Input/Output Voltage DC 40V-DC 75V
7 Unit Max Input Current 40A
8 Unit Standby Power ≤20W
9 Unit Rated Power 7500W
10 Single Cabin Rated Power 350W
11 Communication Mode 4G Netcom/Ethernet
12 Protection Level IP53/IP54(With a rain canopy)
13 Heat-dissipating method Fan Cooling
14 Material Steel Plate
15 Appearance Process Epoxy resin weathering powder
16 Installation Method Use once power on
Scan the QR code to view Kaixin Wechat applet
KAIXIN GROUP QUALITY LEADS THE FUTURE!
Address: No.222 Chuangye Street, Tiexi Economic Development Zone, Anshan, Liaoning
Telephone:0412-8209999
Fax:0412-8491999
E-mail:zgkx@zgkx.com
Web:www.europa-abc.com
© 2022 Liaoning Kaixin Co., Ltd All Rights Reserved
LiaoICP No. 17013104-1